Table of Contents
Advertisement
10.2 NAS Configuration
Tasks
Use the Windows Domain page to perform the following tasks:
Join the ETERNUS CS800 to a Windows workgroup (see
l
Workgroup" on page
Join the ETERNUS CS800 to a Windows domain (see
l
page
Remove the ETERNUS CS800 from a Windows workgroup or domain (see
l
Workgroup or Domain" on page
Joining a Windows Workgroup
Join a Windows workgroup to add the ETERNUS CS800 to a workgroup on a Windows
network. After you join a workgroup, CIFS shares are available for use on the Windows
network.
To join a Windows workgroup:
1. Enter the following information about the Windows domain:
Domain Type
Domain/Workgroup Name
2. Click Apply.
When an SMB server is joined to a workgroup, share security is managed directly
from the remote management console. For a CIFS share, security is provided
through the read only or read/write access to the share. By default, when a CIFS
share is created, the default security setting allows access for all users. Any
access restrictions on individual users can be managed by editing a share on the
NAS Summary page (see
Joining a Windows Domain
Join a Windows domain to add the ETERNUS CS800 to a Windows network using Active
Directory. After you join a domain, CIFS shares are available for use on the Windows
network.
Before joining a Windows domain, make sure the date and time on the ETERNUS CS800 is
correct and is synchronized with the Active Directory Services (ADS) server (see
Time" on page
(domain controller) must be less than 300 seconds.Fujitsu Technology Solutions
208
208).
208).
334). The time difference between the ETERNUS CS800 and the ADS server
210).
Select Workgroup.
Enter the workgroup name.
The workgroup name can be the name of an
existing workgroup or a new workgroup (for
example, Workgroup or Sales).
"Editing a NAS Share" on page
"Joining a Windows
"Joining a Windows Domain" on
"Disjoining a
204).
ETERNUS CS800
"Date &
Advertisement
Table of Contents
