Ost Client Plug-In - Fujitsu ETERNUS CS800 User Manual

Hide thumbs Also See for ETERNUS CS800:

Table of Contents

Figure 175: Accent Page

To configure ETERNUS CS800 Accent:

1. To enable ETERNUS CS800 Accent, select the Enable Deduplication with Accent

Or to disable ETERNUS CS800 Accent, clear the Enable Deduplication with Accent

2. Click Apply.

OST Client Plug-In

Use the OST Client Plug-In page to download the Fujitsu Technology Solutions OST Plug-

OST (OpenStorage) technology allows Symantec NetBackup and Backup Exec to

seamlessly integrate with the ETERNUS CS800. Using OST, NetBackup and Backup Exec

can manage backups through the ETERNUS CS800 and can take advantage of the

ETERNUS CS800

You cannot use ETERNUS CS800 Accent if you are currently using

NetBackup Accelerator or Optimized Synthetic Backups. If you are using

Accelerator, please make sure that Accent is not enabled. For more

information on using NetBackup Accelerator, see the ETERNUS CS800

Configuration and Best Practices Guide for NetBackup from Symantec .

Click the Change Encryption Type link to change the OST data encryption

"Data Encryption" on page

To use ETERNUS CS800 Accent, you must install the Fujitsu Technology

Solutions OST Client Plug-in on the media server. For information about

installing the OST Plug-in and using ETERNUS CS800 Accent, see the

ETERNUS CS800 NetBackup and Backup Exec OST Configuration Guide .

10 Configuration