Table of Contents
Advertisement
10.9 System
Tasks
Use the Access Control Settings page to perform the following tasks:
Change the administrator password (see
l
page
Enable or disable GUI access for the monitor account (see
l
Account" on page
Enable or disable CLI access for the administrator or viewer account (see
l
Accounts" on page
Enable or disable GUI access for the service account (see
l
Account" on page
Enable or disable SSH access for the service account ( see
l
Account" on page
Changing GUI Administrator Password
Use the GUI password when logging onto the remote management console as an
administrator (see
1. Under GUI Administrator, enter the following information:
Old Password
New Password
Confirm New Password
Additional Information
l
l
2. Click Apply.
Enabling GUI Monitor Account
Use the GUI password when logging onto the remote management console as a monitor (see
"Accessing Remote Management" on page
1. Under GUI Monitor do one of the following steps:
l
l
2. Enter the following information:
340
340).
340).
341).
345).
346)
"Accessing Remote Management" on page
Passwords can be up to 32 characters. Alphanumeric characters and special
characters are allowed.
Loss of this password will require Fujitsu Technology Solutions service support.
Select the Enable GUI Monitor Login check box to enable the GUI monitor
account.
Clear the Enable GUI Monitor Login check box to disable the GUI monitor
account.
"Changing GUI Administrator Password" on
Enter the old password.
Enter the new password.
Enter the new password again to confirm it.
133).
"Enabling GUI Monitor
"Enabling CLI
"Enabling GUI Service
"Enabling SSH Service
133).
ETERNUS CS800
Advertisement
Table of Contents
