Table of Contents
Advertisement
9.5 Replication
Send Settings Information
Target System
192
Description
The IP address and replication status for each configured
replication target (up to two). Click to specify a replication
target (see
"Replication Configuration" on page
Status
Ready - (Green) The system is ready to perform
l
replication.
In Progress - (Blue) A replication job is currently in
l
progress.
Queued - (Blue) A replication job is queued and will
l
continue when the system is ready.
Partial - (Yellow) A replication job was partially
l
completed. Generate a replication report to see the files
that were not replicated (see
Manually Paused - (Yellow) Replication was manually
l
paused. To resume replication, click Resume.
System Paused - (Yellow) The system has
l
automatically paused replication due to a problem, for
example, low disk space or a problem on the target
system.
To see more information about the problem that
occurred, click Admin at the top of the remote
management console to view administration alerts (see
"Admin Alerts" on page
view alerts on the target. In addition, make sure that the
system is an allowed replication source on the target
(see
"Replication Configuration" on page
Failed - (Red) A replication job was not completed.
l
Internal Error - (Red) An error occurred during
l
replication.
270).
"Reports" on page
433). You may also need to
270).
ETERNUS CS800
406).
Advertisement
Table of Contents
