Table of Contents
Advertisement
Uploading a Software Image
The Upload Software Image page allows you to upload a software image to update the
software on the ETERNUS CS800.
Before you begin, download the software image on a computer connected to the Internet, and
then copy the software image (.fw) file to the computer you will use to access the
ETERNUS CS800 remote management console.
To access the Software Upgrade page, click the Utilities menu, and then click the
Software Upgrade tab (see figure below).
Figure 293: Software Upgrade Page
To upload a new ETERNUS CS800 software image:
1. Click the Browse button to browse the system and locate the new software image.
2. Click Upload.
3. Click Start to begin the upload process.
Do not close the window until the uploading and unpacking process is complete. An
Information message displays stating the software image was uploaded successfully.
4. Click OK.
5. Click Install.
ETERNUS CS800
14 Utilities
455
Advertisement
Table of Contents
