Fujitsu ETERNUS CS800 User Manual page 134

7.2 Accessing Remote Management
For correct operation of the remote management console, including the display of the
online help, disable any pop-up blockers and enable JavaScript in your Web browser. In
the Google Chrome browser, the help may not appear when Help is selected. If this
occurs, select Settings > Show Advanced Setting > Privacy > Pop-ups > Manage
Exceptions. Add the IP address to the exceptions box, select Allow, and click Done.
Logging On to the ETERNUS CS800
1. Launch a supported Web browser on a workstation that has network access to the
ETERNUS CS800.
2. In the browser address box, type the IP address of the ETERNUS CS800, and then
press <Enter>.
The Login window displays (see
Figure 92: Login Window
If the Login window does not display, verify that the IP address is correct and that the
network path to the ETERNUS CS800 is valid. Also verify that you are using a
supported Web browser. Then try again. If you are still unable to access the Login
window, contact your ETERNUS CS800 administrator.
3. Select the login type and enter the corresponding password.
134
The default IP address is 10.1.1.1. The IP address can be changed during
installation using the Getting Started Wizard or at a later time on the Network
page (see "Network" on page
"Login Window" on page
319).
134).
ETERNUS CS800