Table of Contents
Advertisement
Figure 231: Storage Encryption page
Use the Storage Encryption page to perform the following tasks:
Enable Storage Encryption and specify the encryption type (see
l
Encryption" on page
Monitor initial storage encryption process (see
l
Enable Storage Encryption
To enable the Storage Encryption:
1. Select a encryption type "AES" or "Fujitsu" from the pull down list
l
l
2. Click Enable.
Monitor Initial Encryption
During initial encryption an "Initial Encryption" progress bar is displayed, which informs about
the percentage of data already encrypted.
ETERNUS CS800
357).
AES: Advanced Encryption Standard (AES: Standard encryption used for
information processing by the US federal government)" is a standardized encryption
method. The ETERNUS CS800 adopt the AES 128-bit encryption.
Fujitsu: "Fujitsu" is an encryption method which uses a Fujitsu proprietary
algorithm. Compared to AES, its practical security level is almost equal while it
allows faster processing than AES.
CAUTION!
Once encrypted, date on the storage array cannot be changed to non-encrypted
data.
"Enable Storage
"Monitor Initial Encryption" on page
10 Configuration
357).
357
Advertisement
Table of Contents
