Figure 150: Media Actions Page
To perform actions on virtual tape cartridges:
1. In the Partition drop-down box, select the partition that contains the cartridges to work
with.
The table displays the following information for all virtual tape cartridges in the partition:
Barcode
Type
Partition
WP
ETERNUS CS800
Select UNASSIGNED to work with cartridges that are not assigned to any
partition.
The barcode number of the cartridge.
The cartridge type.
The partition where the cartridge is located.
The write protect status of the cartridge (Write Enabled or Write
Protected).
10 Configuration
227