Table of Contents
Advertisement
To automatically replicate (duplicate) all data on an LSU to a remote LSU that resides on a
ETERNUS CS800 in a different NetBackup domain:
1. On the target system, add the source system to the list of allowed replication sources.
2. On the target system, create a local OST user (see
3. On the target system, create a storage server and LSU to receive the replicated OST
data (see
4. On the source system, specify the target system that will receive the replicated data.
5. On the source system, create a remote OST user with the same user name and
password that you used in step 2 above (see
6. On the source system, create a storage server and LSU, and enable the LSU for
Automatic Image Replication (see
For Remote Storage Server and Remote LSU, make sure to specify the storage server
and LSU created in step 3 above. Also, for Remote User, make sure to select the
remote user created in step 5 above.
7. Configure storage lifecycle policies in NetBackup to control when automatic replication
of the LSU occurs (see the Symantec NetBackup Administrator's Guide).
ETERNUS CS800
CAUTION!
On the target system, make sure to create a local user on the Configuration >
OST > Manage Users page.
"Adding a Storage Server" on page
Fujitsu Technology Solutions recommends selecting the Available Capacity
option when creating an LSU for use with Automatic Image Replication.
CAUTION!
On the source system, make sure to create a remote user on the Configuration >
OST > Manage Remote Users page.
"Manage Users" on page
246).
"Manage Remote Users" on page
"Adding a Storage Server" on page
10 Configuration
259).
261).
246).
243
Advertisement
Table of Contents
