Table of Contents
Advertisement
Item Indicator, Button, Port Description
2
NMI button
3
ID indicator /
ID button
4
CSS indicator (yellow)
ETERNUS CS800
This button is used to troubleshoot software and device
driver errors. It can be pressed using the end of a paper
clip.
CAUTION!
Do not press! Risk of data loss! The NMI button may
only be used by service.
The ID button highlights the ID indicator on the front and
I/O panels for easy server identification.
The ID indicator lights up blue on the front and on the rear of
the server when the ID button is pressed. Both ID
indicators are synchronized.
Does not light up
when no critical event was detected for a CSS
(Customer Self Service) component.
Lights up yellow
if a prefailure event was detected for a CSS
component that you can fix yourself (for reasons of
precaution) with the CSS concept.
Flashes yellow
if an error was detected that you can fix yourself with
the CSS concept.
If the event is still acute after a power failure, the indicator
is activated after the restart. The indicator also lights up in
standby mode.
3 Hardware Description
45
Advertisement
Table of Contents
