Fujitsu ETERNUS CS800 User Manual page 179

Notification
Type
3. Select the Notification Enabled check box to enable sending of notifications to the
recipient.
4. Click Apply.
The recipient displays in the Email Recipient list.
5. (Optional) To add additional recipients, click Add and then repeat Steps 1–4.
To change a recipient, select it in the Email Recipient list and click Edit. To remove a
recipient, select it in the Email Recipient list and click Delete.
6. Click Next to continue.
ETERNUS CS800
Select the types of notifications to send to the recipient:
High - Send e-mail notifications for High service tickets.
l
High service tickets indicate that a critical problem has occurred and
needs to be resolved immediately. The operation and performance of
the ETERNUS CS800 are degraded, and there is a risk of system
failure or data loss.
High and Medium - Send e-mail notifications for High and Medium
l
service tickets.
Medium service tickets indicate that a serious problem occurred and
needs to be resolved, but it does not necessarily need to be fixed
immediately. The operation and performance of the ETERNUS
CS800 may be degraded.
All - Send e-mail notifications for High, Middle, and Low service
l
tickets, as well as any administration alerts.
Low service tickets indicate that a minor problem occurred and needs
to be resolved, but the operation and performance of the ETERNUS
CS800 are not significantly affected.
8 Configuration Wizards
179