Table of Contents
Advertisement
7.2 Accessing Remote Management
Figure 93: Home Page
If you are unable to log on, verify that the password is correct, then try again. If you are
still unable to log on, contact your ETERNUS CS800 administrator.
CAUTION!
More than one Administrator can log on to the ETERNUS CS800 at a time. If two
Administrators attempt to make configuration changes on the same page at the same
time, it is possible that one Administrator's changes will overwrite the other's. Always
coordinate configuration changes with other Administrator users.
Logging Off of the ETERNUS CS800
When you are done working in the ETERNUS CS800 remote management console, click
Logout on the upper right of the remote management console to end your session.
If the ETERNUS CS800 remote management console is idle for more than 30 minutes
(default setting), the system logs off the user. The inactivity timeout can be changed on the
Login Session page (see
There is no inactivity timeout for CLI Administrator logins over Secure Shell (SSH).
136
"Login Session" on page
355).
ETERNUS CS800
Advertisement
Table of Contents
