Placing The Documents; Placing The Documents In The Flatbed Scanner - Minolta Di150f User Manual

Sending Faxes

Placing the Documents

Insert the document face up. In the
document feeder.
Place the document in the centre of the
ADF and adjust the paper guides so
that they lightly touch the edges of the
document.

Placing the Documents in the Flatbed Scanner

Place the document face down in the
lower front corner of the glass and close
the cover.
You can insert up to 50 pages into the
feeder. Make sure the pages are well placed and aligned before starting
the transmission.
If the paper is curled or pages stick together more than one page at a time
could be drawn into the machine. This might lead to paper jams or faulty
transmissions. In this case you should insert the pages one by one to
ensure a correct feeding of the documents.
The standard memory holds ca.57 pages. Take care that the indicated
memory capacity does not drop to 0 (%) during scanning, since the
process will be cancelled in this case.
Note
If this occurs repeatedly, contact your technical service for a memory
upgrade. Until then you should send large documents in direct mode,
i.e. with the memory turned off.
Di 150f
Bild 30
Bild 31
4
4-51