Bios Setup Utility Hot Keys; Accessing The Bios Setup Utility Menus - Sun Oracle Sun Fire X4270 M2 Service Manual

2.5.3

BIOS Setup Utility Hot Keys

TABLE 2-6
corresponding serial connection key combinations.
TABLE 2-6
Sun ILOM Remote
Console Keys
F1
F2
F7
F8
F9
*
F10
F12
* F10 is not supported on the Oracle ILOM Remote Console; instead, use the arrow keys to navigate to the Exit
menu and press Enter.
2.5.4

Accessing the BIOS Setup Utility Menus

You can access BIOS Setup Utility screens from the following interfaces:
Use a USB keyboard, mouse, and VGA monitor connected directly to the server.
■
Use a terminal (or terminal emulator connected to a computer) through the serial
■
port on the back panel of the server.
Connect to the server using the Oracle ILOM Remote Console.
■
The following procedure describes the steps for accessing the BIOS Setup Utility
menus.
2-14 Sun Fire X4270 M2 Server Service Manual • May 2011
provides a description of the BIOS Setup Utility hot keys and the
BIOS Setup Utility Hot Keys and the Corresponding Serial Connection Key
Combinations
Serial Connection Hot Key
Combinations
Ctrl+Q (Press and hold the
Ctrl key and type Q)
Ctrl+E
Ctrl+D
Ctrl+P
Ctrl
+O
Ctrl
+S
Ctrl
+N
Function
Access the BIOS Setup Utility if there is an
error during the boot process
Enter BIOS Setup Utility while the system
is performing the power-on self test (POST)
Discard changes but do not exit
Select the BBS Popup menu, which allows
you to select a boot device
Load optimal BIOS defaults
Save changes and exit
Boot the server from the network (PXE
boot)