Restore The Sp Firmware Image Using The Preboot Menu - Sun Oracle Sun Fire X4270 M2 Service Manual

You must have a valid .flash firmware image file on a TFTP server.
■
Note – Restore the SP firmware using the Preboot Menu requires a .flash file
instead of a.pkg file that is typically used to update the SP using the ILOM
interfaces.
7.2.4.2

Restore the SP Firmware Image Using the Preboot Menu

1. Access the Preboot Menu as described in
Menu" on page
Caution – The use of the net flash command is reserved for use by service
personnel only.
2. At the
net flash IPaddress path/name.flash
Where:
■
■
■
For example:
net flash 10.8.173.25 images/system-rom.flash
After a series of messages, the Preboot Menu prompt appears.
Preboot>
3. At the Preboot> prompt, type the reset command to restart the SP.
For example:
Preboot> reset
The Preboot Menu exits and ILOM restarts.
7-5.
prompt, type:
Preboot>
IPaddress is the IP address of a TFTP server
path is the path to the file relative to /tftpboot
name is the first part of the .flash file file name
Chapter 7
Section 7.2.1, "Accessing the Preboot
Troubleshooting the Server and Restoring ILOM Defaults 7-13