Returning The Server To Operation; Installing The Front Cover Onto A Server With 2.5-Inch Storage Drives - Sun Oracle Sun Fire X4270 M2 Service Manual

6
C H A P T E R

Returning the Server to Operation

This chapter describes how to return the Sun Fire X4270 M2 Server to operation after
you have performed service procedures.
The following topics are covered in this chapter:
Section 6.1, "Installing the Front Cover Onto a Server with 2.5-Inch Storage
■
Drives" on page 6-1
Section 6.2, "Installing the Server Top Cover" on page 6-2
■
Section 6.3, "Reinstalling the Server in the Rack" on page 6-4
■
Section 6.4, "Returning the Server to the Normal Rack Position" on page 6-5
■
Section 6.5, "Powering On the Server" on page 6-7
■
Caution – Hazardous voltage present. Never attempt to run the server with the
covers removed.
Caution – Equipment damage possible. Covers must be in place for proper airflow.
6.1 Installing the Front Cover Onto a Server
with 2.5-Inch Storage Drives
Note – This procedure only applies to servers with 2.5-inch storage drives.
6-1