Show Traffic Control; Config Traffic Trap - D-Link DGS-1100-06/ME Cli Reference Manual

To configure traffic control and enable broadcast storm control system wide:
DGS-1100-06/ME:5#config traffic control all multicast enable unicast disable br
oadcast enable threshold 65
Command: config traffic control all multicast enable unicast disable broadcast
enable threshold 65
Success.
DGS-1100-06/ME:5#

show traffic control

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display traffic control setting:
DGS-1100-06/ME:5# show traffic control
Command: show traffic control
Traffic Storm Control Trap : [None]
Port Thres Broadcast Multicast Unicast Action Count Time
----
1
2
3
4
5
6
Total Entries : 6
DGS-1100-06/ME:5#

config traffic trap

Purpose
Syntax
DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
To display current traffic control settings.
show traffic control {<portlist>}
The show traffic control command displays the current storm traffic
control configuration on the Switch.
<portlist> - A port or range of ports whose settings are to be
displayed.
None.
hold Storm Storm
------- -------------- ------------- ----------
0 Disabled Disabled Disabled Drop
0 Disabled Disabled Disabled Drop
0 Disabled Disabled Disabled Drop
0 Disabled Disabled Disabled Drop
0 Disabled Disabled Disabled Drop
0 Disabled Disabled Disabled Drop
To configure the traffic control trap on the Switch.
config traffic trap [storm_cleared | storm_occured | both | none]
Storm down
-------- --------- ---------
0
0
0
0
0
0
105
Interval
0
0
0
0
0
0