Stack Menu Settings; Displaying Stack Menu - Christie LWU900-DS User Manual

3. STACK menu settings

Set the Intellectual Stack operation using the STACK menu.
• If using Simple Stack without RS-232C connection, skip this chapter.
NOTE
• If you do not need to change the settings made during the installation
explained prior to this chapter, go to
mode. ( 15 )
• Read
3.7 Important information for Intellectual Stack

3.1 Displaying STACK menu

Use the ▲/▼/◄/► buttons to go into the following menu.
ADVANCED MENU > OPTION
> SERVICE > COMMUNICATION > STACK
STACK menu appears on screen.
(Operating Guide
The setting for Intellectual Stack operation starts from this menu.
• Check that the following settings are made on both projectors.
NOTE
Otherwise, STACK menu on the projectors cannot be operated. ( 5 )
- STANDBY MODE in SETUP menu: NORMAL
(Operating Guide
- COMMUNICATION TYPE under COMMUNICATION in SERVICE menu: OFF
(Operating Guide
- STACK LOCK in SECURITY menu: OFF ( 5 )
LWU900-DS/LHD878-DS/LWU755-DS
User's Manual - Instant Stack Guide
3.3 Selecting the light source operation
→
OPTION menu)
→
SETUP menu)
→
OPTION menu)
carefully. ( 21 )
13
020-001617-01 Rev. 1 (12-2018)
LIT MAN USR DS Series ISG