Preparing The Machine For Service - Toro 41394 Operator's Manual

Protecting the Machine
1. Remove the key from the starter switch and
put the key in a safe place out of the reach of
children.
2. Cover the machine to protect it and keep it clean.
Preparing the Machine for
Service
1. Insert the pressure-gauge tube into the tube
coupler at back of the pressure gauge
139).
Figure 139
1. Pressure-gauge tube
2. Tube coupler
2. Close the spigot of the fresh-water tank.
3. Add fuel to the fuel tank.
4. Fully charge the battery; refer to
Battery (page 68).
5. Install the battery into the chassis; refer to
Installing the Battery (page
(Figure
g276304
3. Pressure gauge
Charging the
68).
93