Panasonic KX-TD500 System Reference Manual page 82

3.00 Connection of Optional Cards
3.01 TSW Conference Expansion
Card (KX-TD50104)
Connector
1) Connection to the TSW card
1. Insert the 30-pin connector (plug) on the TSW CONF card into the 30-pin connector
(jack) on the TSW card.
2. Install the TSW card into the Basic Slot 2 (BS2). See page 2-C-3.
KX-TD50104 TSW-CONF
"TSW CONF" is marked.
TSW Conference Card
50-pin connector
56-pin connector
(Plug)
Make sure the card is in
the correct direction
50-pin connector
56-pin connector
(Jack)
TSW Card
• This card is installed on the T-SW card.
KX-TD50104 TSW-CONF
2-C-4