1.23.2 Confirmation Tone
Description
At the end of feature operations, the PBX confirms the success of the operation by sending a
confirmation tone to extension users.
Tone 1
Tone 2
Tone 3-1
Tone 3-2
Tone 4-1
Tone 4-2
Tone 5
Conditions
•
Confirmation Tone Patterns
All confirmation tone patterns have a default (
•
It is possible to eliminate each tone.
Type
a)
b)
a)
b)
a)
b)
Sent before a conversation is established when accessing the
following features by their feature numbers:
•
•
•
•
•
Sent when a call changes from a two-party call to a three-party
call. (For example, Executive Busy Override, Conference,
Privacy Release, Two-way Record.)
Sent when a call changes from a three-party call to a two-party
call. (For example, Executive Busy Override, Conference,
Privacy Release, Two-way Record.)
Sent when a call is placed on hold (including a consultation
hold).
Description
Sent when the setting is accepted.
Sent when a call is received in voice-calling mode
(Alternate Receiving—Ring/Voice). The caller's voice will
be heard after the tone.
Sent from an external paging device or an extension before
being paged.
Sent when a call is received while an extension is in Hands-
free Answerback mode.
Sent before a conversation is established using the Paging
feature.
Sent to the caller when a conversation is established with
an extension in one of the following modes:
•
Hands-free Answerback mode
•
Voice-calling mode (Alternate Receiving—Ring/Voice)
Call Park Retrieve
Call Pickup
Hold Retrieve
Paging Answer
Trunk Answer From Any Station (TAFAS)
5.2.1 Tones/Ring Tones).
1.23 Audible Tone Features
Feature Guide
165