Table of Contents
Advertisement
Using Caller ID service
Important:
R This unit is Caller ID compatible. To use Caller
ID features, you must subscribe to a Caller ID
service. Contact your phone service provider for
details.
Caller ID features
Handset / Base unit
When an outside call is being received, the caller
information is displayed.
Caller information for the last 50 callers is logged
in the caller list from the most recent call to the
oldest.
R If the unit cannot receive caller information, the
following is displayed:
– "Out of Area": The caller dials from an
area which does not provide a Caller ID
service.
– "Private Caller": The caller requests not
to send caller information.
R If the unit is connected to a PBX system, caller
information may not be properly received.
Contact your PBX supplier.
Missed calls
Handset / Base unit
If a call is not answered, the unit treats it as a
missed call and
is displayed. This lets you know
if you should view the caller list to see who called
while you were away.
Even if only one missed call in the caller list is
viewed (page 39),
disappears from the
display. When you receive another new call,
displayed again.
Note:
R Even when there are unviewed missed calls,
disappears from the standby display if the
following operation is performed by one of the
registered handsets:
– A handset is replaced on the charger.
– Pressing MOFFN on a handset.
– Pressing MEXITN on the base unit.
Phonebook name display
When caller information is received and it matches
a phone number stored in the phonebook, the
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
TGF320E(en)_0123_ver020.pdf
39
stored name in the phonebook is displayed and
logged in the caller list.
Talking Caller ID
Handset / Base unit
This feature let you know who is calling by
announcing the caller information.
To use this feature, you must:
– subscribe to a Caller ID service of your phone
service provider.
– turn this feature on (page 30).
– store the name and phone number in the
phonebook (page 24).
Phonebook name announcement
When caller information is received from your
phone service provider and it matches a phone
number stored in the phonebook, the stored name
is announced following every ring.
If that phone number has not been stored in the
phonebook, the caller information is announced.
Note:
R Name pronunciation may vary. This feature may
not pronounce all names correctly.
Caller list
Important:
R Make sure the unit's date and time setting is
correct (page 15).
Viewing the caller list and calling back
Handset / Base unit
is
1
Proceed with the operation for your unit.
Handset: MCN CID
Base unit: MCIDN
2
Press MCN to search from the most recent call,
or press MDN to search from the oldest call.
3
Proceed with the operation for your unit.
Handset:
– To call back, press M
– To exit, press MOFFN.
Base unit:
– To call back, lift the corded handset.
– To exit, press MEXITN.
Caller ID Service
N.
39
2015/01/23
18:26:30
Advertisement
Table of Contents
