Chapter 5. Maintenance; Erifying The Status Of Wbs24; Status Inquiry Via The Led Status Indicators - Samsung OfficeServ 500 Service Manual

CHAPTER 5
Maintenance
This chapter describes how to solve problems via a LED status of WBS24, how to
verify the WBS24 using a web browser and how to upgrade the WBS24 software.
1 Verifying the Status of WBS24
1.1

Status inquiry via the LED Status Indicators

With the LED indicators on the front panel of the WBS24, it is possible to verify the
WBS24 status. When power is supplied to the WBS24, booting is allowed about ten
minutes later. At this time, booting is indicated as the LD2 LED blinks regularly.(At
this time, other LEDs can be unintentionally turned on, but they should be ignored).
After receiving the initialized data from the system and when booting is completed,
the LD2 LED blink will be disappeared. From this time, the on-line service becomes
practicable. After booting is completed, each LED indicator of on-line status contains
the uses as shown below.
© SAMSUNG Electronics Co., Ltd. Page 5-1