Exabyte X200 Library Installation And Operation Manual page 73

3. If, after viewing the IDs displayed on the SCSI Setup Menu,
4. To set the SCSI ID for the library, press >@ or >@ until the screen
5. To advance to Drive 1 (D1), press >1H[W^ ' HYLFH@ .
6. To set the SCSI ID for Drive 1, press the >@ or >@ softkey until
Installation and Operation
you want to change any of the IDs, press the >6&6,^ , '^0HQX@
softkey. The SCSI ID Menu screen appears:
displays the correct SCSI ID.
the screen displays the correct SCSI ID.
Library Configuration
59