Library Components - Exabyte X200 Library Installation And Operation Manual

Chapter 1
The storage capacity of the Exabyte X200 library depends on the
type of drive installed and the media being used. The following
table describes the library's storage capacity in terabytes (TB)
when operating with ten tape drives and 200 data cartridges.
* Assuming an average data compression ratio of 2.5:1 for M2 and 2: 1 for Mammoth.
The X200 library is available in a wide, low-voltage differential
(LVD) or high-voltage differential (HVD) SCSI configuration. The
library and tape drives operate as independent SCSI devices on
up to 11 SCSI buses.

Library components

The following sections describe the library's front panel, internal,
and back panel components.
4
Drive type
M2
Mammoth
Library storage capacity
30.0 TB*
(using 225-meter SmartClean media)
8.0 TB*
(using 170-meter standard AME media)
Exabyte X200