Exabyte X200 Library Installation And Operation Manual page 142

Chapter 9
Step 1 – Remove the magazines from the library
To easily access the drum and the mounting plates, remove all of
the magazines by following these steps:
1. Unlock and open the front door of the library.
2. Make sure the robot and its cabling are safely out of the way
3. Remove each magazine by pulling it out first from the top,
128
of the magazines. If necessary, move the robot to the bottom
of the vertical axis by pushing firmly against the top of its base.
then the bottom. (You can access back magazines by rotating
the drum manually.)
Exabyte X200