Exabyte X200 Library Installation And Operation Manual page 158

Chapter 9
3. Press >6DYH@ to reset; the library will now automatically
4. If you removed a cartridge from the fixed slot before
Step 8 – Configure the library for softw are slots
If you want to change the number of slots recognized by your
software application, you can set the Max Addressable Elements
option. For information about setting this option, see
144
recalibrate to determine the locations of the new slots.
When calibration is complete, the Status screen displays a
library ready status.
calibrating the library, you can replace the cartridge in one of
two ways:
ΠInsert the cartridge into the entry/ exit port and use a Move
Cartridge command to place it in the fixed cartridge slot.
ΠOpen the library door and return the cartridge to the fixed
slot. Then, close and lock the library door.
page 69.
Exabyte X200