Table of Contents
Advertisement
This appendix describes the laser bar code scanner and safety
notices for the scanner.
The Exabyte X200 library uses a laser beam to read the bar code
labels. Laser power of up to 1 megawatt at 660 nanometers could
be accessible inside the library. This laser energy complies with
CDRH Class II and IEC Class 3B.
Laser Safety Interlocks
The library has two safety interlock features to prevent laser beam
exposure: the keylock and the tape drive interlock.
Keylock
When you turn the key to unlock the door, the solenoid latch will
not release the door until the robot has finished performing the
current command, moved to park position, and the laser on the
bar code scanner is powered off.
Installation and Operation
Laser Safety Information
D
261
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the X200 Library and is the answer not in the manual?
Questions and answers