Exabyte X200 Library Installation And Operation Manual page 29

Step 3 – Obtain additional equipment
The following table lists the additional equipment you may need
to obtain.
* These items can be purchased from Exabyte. See
Installation and Operation
Equipment
SCSI cables*
SCSI terminators*
SCSI adapters*
Power cord (if outside the U.S.
or Canada)*
Ethernet cable
Data cartridges* (40, 80, 120,
160, or 200, depending on the
number of slots in your library)
Cleaning cartridges* (1 to 2)
Bar code labels
Rack-mount conversion:
19-inch by 30- to 36-inch EIA
standard rack with anti-tip
support legs
inside of the back cover, or contact your service provider.
Installation and Setup
For more information...
Use only wide LVD or HVD SCSI
cables. For more information
about cable specifications, see
page 235.
See page 236.
See page 237.
See page 234.
See page 237.
See page 42.
See page 21.
To create your own labels, see
the Exabyte Bar Code Label
Specification for 8mm
Cartridges. To obtain
information about reliable
vendors, see Exabyte
at www.exabyte.com.
Contact a rack supplier.
" Contacting Exabyte"
'
s web site
on the
15