Table of Contents
Advertisement
Resetting a tape drive
Resetting the tape drive clears any error, resets the drive, and
ejects the cartridge from the drive (unless a hardware error has
occurred).
Note: If you reset the tape drive while a cartridge is loaded, it
To reset the tape drive:
1. Press and hold the unload button for at least 10 seconds.
2. Release the unload button.
View ing tape drive information
The Tape Drive Information Menu allows you to view
information about the tape drive, including the type of tape drive
installed and its operational status. Tape drive information is
updated whenever there is a change in drive status.
Installation and Operation
rewinds the tape to the beginning after the reset is
complete. The reset may take as long as 2.5 minutes
depending on what size cartridge you are using.
Tape Drive Operation
99
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the X200 Library and is the answer not in the manual?
Questions and answers