Exabyte X200 Library Installation And Operation Manual page 177

To perform a demo, you need to set the following three options:
ΠScan Labels. When the Scan Labels option is set to YES, the
ΠCycle EE Port. When the Cycle EE Port option is set to YES,
ΠRequested Moves. This option allows you to specify the
Installation and Operation
robot scans bar code labels as part of the demo.
the entry/ exit port is extended and retracted as part of the
demo.
number of times you want to perform the demo. The default
value is 100, but you can request from zero to 1,000,000 moves.
Hardware Exercises
163