Exabyte X200 Library Installation And Operation Manual page 237

View the LCD passw ord
To view the LCD password:
1. If necessary, connect the serial cable to the library and the host
2. Make sure the library's baud rate matches the host baud rate
3. From your host computer, access the software you are using
4. From the Help screen (see
5. You can view the LCD password value to the right of the field
Installation and Operation
computer (see page
(see page 202).
to communicate with the library (for example, CHS Terminal).
press [Enter]. The Configuration Information screen appears:
name. In the example above, the LCD password is set to 000.
202).
page 204), type
Library Firmware
and then
config
223