Exabyte X200 Library Installation And Operation Manual page 231

3. Click on Setup. The following screen appears:
4. Select the COM Port for the computer's serial port
Step 3 – Transfer the new firmw are
To transfer the tape drive firmware, follow these steps:
1. From Mammoth Monitor's main screen, click >/RDG^ & RGH@ .
2. A dialog box appears, prompting you for the filename. Specify
Installation and Operation
communication.
Note: You do not need to set the baud rate; Mammoth
Monitor will automatically adjust it to 9600.
the source location (path and filename) of the new firmware
file.
Library Firmware
217