Exabyte X200 Library Installation And Operation Manual page 209

Installation and Operation
Field name Description
Label Error Indicates whether the bar code scanner was unable
to read the cartridge label, as follows:
0 – The bar code scan was successful, a reset
condition occurred, or the door was opened.
60 – The bar code scanner could not read the bar
code label because there was no label on the
cartridge.
61 – The bar code scanner could not read the bar
code label because the label was unreadable.
62 – The bar code scanner could not read the label
because the magazine is not present.
63 – The bar code scanner could not read the label for
a single slot because the inventory is
questionable.
64 – The bar code scanner could not read the label
because of a problem with the checksum
character.
65 – The bar code scanner could not read the label
for the EE port slot because the EE port is
extended.
67 – The library could not collect bar code data for the
fixed slot because of a firmware or hardware
problem.
See Appendix C for Label Error corrective actions.
Send Vol Indicates whether the cartridge label matched the
Match template sent with the last SCSI SEND VOLUME TAG
command, as follows:
0 – The label did not match the template.
1 – The label matched the template.
Element Label (continued)
Library Status
195