Exabyte X200 Library Installation And Operation Manual page 102

Chapter 6
3. Open the EE port door by pressing in on the tabs located on
4. Lower the EE port door.
5. Insert up to five cartridges into the EE port magazine.
6. Raise the EE port door until the latch engages.
7. To retract the EE port (so that the robot can access cartridges
8. To move cartridges from the EE port to empty slots in the
88
either side of the door handle, as shown in the following
figure.
in the EE port magazine), press the >5HWUDFW^((^ 3 RUW@ softkey.
É
Important
the robot can inventory and access cartridges in
the EE port magazine.
library, use the application software or the Move Cartridge
command (see page
Tabs
You must retract the EE port so that
166).
Exabyte X200