Exabyte X200 Library Installation And Operation Manual page 220

Chapter 12
3. Press [Alt-D].
4. Use your terminal emulation program to specify the
Step 5 – Transfer the new flash code
To transfer the new flash code to the library or Ethernet card:
1. From the Program Flash screen (shown below), transfer the
2. Press [Enter], then [Alt-S].
206
destination location (path and filename) for the current
firmware.
flash code file, as follows:
ΠFor the library flash code, type
ΠFor the Ethernet flash code, type
The library erases the current flash code and then displays the
following prompt:
pflash
penetflash
Begin XMODEM download of flash code
.
Exabyte X200