Exabyte X200 Library Installation And Operation Manual page 221

3. Use your terminal emulation program to specify the source
4. Select or type in the file name you want and then press [Enter].
The system initiates the firmware upgrade and displays its
progress on the screen. When the upgrade is successfully
completed, the library automatically resets.
Step 6 – Transfer the new boot code
The library and Ethernet boot code versions must correspond to
the new library and Ethernet flash code versions. To make sure
you have the appropriate code levels for your library, check the
Exabyte web site at www.exabyte.com. If necessary, you can
transfer updated boot code to the library or Ethernet card.
Installation and Operation
location (path and filename) of the new flash code.
Note: If necessary, CHS Terminal users can use wild card
characters (* .* ) and then press [Enter] to search the
host's hard drive directories for the desired file name.
If you are transferring Ethernet flash code, wait
until the library automatically resets (indicating
that the transfer of code is complete) before
attempting to perform any library operations.
To transfer boot code, contact Exabyte Technical
Support for assistance (see
on the inside of the back cover).
CAUTION
CAUTION
" Contacting Exabyte"
Library Firmware
207