Table of Contents
Advertisement
About the Exabyte X200
The library contains the following components:
ΠCartridge handler (referred to as the robot)
ΠTwo to ten Exabyte Mammoth-2 (M2) or Exabyte Mammoth
Π8, 16, 24, 32, or 40 data cartridge magazines (each magazine
ΠOne or two power supplies
ΠFixed cartridge slot to store a cleaning cartridge or an
ΠCalibration block slot to store the calibration block
ΠLaser bar code scanner to maintain a customized cartridge
ΠEntry/ exit port, containing a removable magazine with five
ΠEthernet interface for NetStorM Library Monitor remote
Installation and Operation
tape drives
holds five cartridges), for a total of 40, 80, 120, 160, or 200
cartridges
additional data cartridge
inventory and to calibrate the library
cartridge slots, to access data cartridges without opening the
library door
library management
Product Overview
3
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the X200 Library and is the answer not in the manual?
Questions and answers