Exabyte X200 Library Installation And Operation Manual page 153

To attach magazine labels and cartridge slot labels to the
mounting plates, follow these steps:
1. Manually rotate the drum until mounting plate 0 is facing you.
2. Using the small labels provided in the upgrade kit, attach
3. Attach cartridge slot label 1 – 5 to the rectangular indentation
4. Similarly, attach the appropriate magazine and cartridge slot
Installation and Operation
magazine label 0 to the rectangular indentation on the upper
right corner of mounting plate 0, as shown in the following
figure.
on the upper left corner of mounting plate 0.
labels to all of the remaining mounting plates.
Library Upgrades
139