Install Snap Rings - Toyota MR2 1988 Repair Manual

MANUAL TRANSAXLE - E51 Transaxle MT-87
E8694
(b) Leaning the output shaft to the differential side,
install the input shaft assembly.
7. INSTALL SNAP RINGS
(a) Using a plastic hammer, install the snap rings to the
No. 1, No. 2 and No. 3 shift fork shafts.
(b) Using a plastic hammer, install the reverse shift fork
and snap ring to the No. 3 shift fork shaft.
8. INSTALL NO. 2 SHIFT FORK AND NO. 3 SHIFT
FORK SHAFT WITH REVERSE SHIFT FORK
(a) Install the No. 2 shift fork to the No. 2 hub sleeve.
(b) Install the No. 3 shift fork shaft with reverse shift
fork.