Install Apply Tube Bracket - Toyota MR2 1988 Repair Manual

Table of Contents

Advertisement

iP
-
AUTOMATIC TRANSAXLE - On-Vehicle Repair
AT-43
AT2220
06216
AT2223
OR0022
8.
INSTALL APPLY TUBE BRACKET
Each bolt length (mm) is indicated in the figure.
9.
INSTALL OIL STRAINER
10.
11.
12.
13.
Each bolt length (mm) is indicated in the figure.
Torque:
100 kg-em {7 ft-lb, 10 N·m)
INSTALL MAGNETS IN PAN AND INSTALL OIL PAN
WITH NEW GASKET
CAUTION:
Make sure that the magnets do not inter-
fere with the oil tubes.
Torque:
50 kg-em (43 in.-lb, 4.9 N·m)
INSTALL DRAIN PLUG WITH NEW GASKET
SST 09043-381 00
Torque:
175 kg-em {13 ft-lb, 17 N·m)
FILL TRANSMISSION WITH ATF
Add only about two liters of A TF.
CAUTION:
Do not overfill.
Fluid type:
ATF DEXRON® II
CHECK FLUID LEVEL (See page AT-5)

Advertisement

Table of Contents
loading

Table of Contents