Toyota MR2 1988 Repair Manual page 148

\
\
~\
~~
'
~\
L--1
ENGINE MECHANICAL- Cylinder Block EM-105
EM1645
EM1603
25. INSTALL RADIATOR RESERVOIR TANK
26. INSTALL GROUND STRAP TO WATER INLET
HOUSING
27. {M/T vehicle)
INSTALL TRANSAXLE PROTECTOR
28. CONNECT SPEEDOMETER CABLE
29. CONNECT FOLLOWING CONNECTORS:
• Engine wire and engine main wire connector
• Back-up light switch connector (MIT only)
30. CONNECT VACUUM HOSE TO CHARCOAL CANISTER
31. CONNECT FUEL RETURN HOSE
32. CONNECT FUEL HOSE TO FILTER
Torque: 300 kg-em (22 ft-lb, 29 N·m)
33. CONNECT AIR BLEEDER HOSE TO WATER INLET
HOUSING
34. CONNECT HEATER HOSES AND NO.6 RADIATOR
HOSE
(a) Connect the No. 6 radiator hose to the water inlet
housing.
(b) Connect the heater hoses to the cylinder head rear
plate and water inlet housing.
35. INSTALL AIR FLOW METER WITH NO.1 AIR HOSE
36. INSTALL BATTERY
37. CONNECT CRUISE CONTROL VACUUM HOSE
38. CONNECT FOLLOWING CABLES:
• Accelerator cable
• (w/ Cruise control)
Cruise control cable
• (A/T vehicle)
A/T throttle cable
(See page AT -6)