Disassembly Of Starter - Toyota MR2 1988 Repair Manual

ST-4
STARTING SYSTEM - Starter
ST0269
\
~T0271
ST0009
DISASSEMBLY OF STARTER
(See page ST -3)
1. REMOVE FIELD FRAME WITH ARMATURE FROM
MAGNETIC SWITCH ASSEMBLY
(a) Remove the nut and lead wire from the magnetic
switch terminal.
(b) Remove the two through bolts. Pull out the field
frame with the armature from the magnetic switch
assembly.
(c) Remove the 0-ring.
2. REMOVE STARTER HOUSING FROM MAGNETIC
SWITCH ASSEMBLY
(a) Remove the two screws.
(b) Remove the starter housing with the pinion gear. idler
gear and clutch assembly
3. REMOVE CLUTCH ASSEMBLY AND GEARS FROM
STARTER HOUSING
4. REMOVE STEEL BALL AND SPRING
Using a magnetic finger, remove the spring and steel ball
from the clutch shaft hole.