Table of Contents
Advertisement
AT-116
AUTOMATIC TRANSAXLE - Assembly of Transmission
AT0595
16. INSTALL PARKING LOCK PAWL, PAWL SHAFT AND
SHAFT CLAMP
17. INSTALL UNDERDRIVE BRAKE PISTON
(a)
Install new 0-rings on the piston.
Coat the 0-rings with A TF.
(b)
Place the piston into the case with the cup side up,
being careful not to damage the 0-rings.
18. INSTALL BRAKE PISTON RETURN SPRING
19. INSTALL PLATES, DISCS AND FLANGE
(a)
Install in order: Plate-disc-plate-disc-plate-disc
(b)
Install the flange facing the flat end upward.
20. COMPRESS RETURN SPRING AND INSTALL SNAP
RING IN GROOVE
(a)
Place SST on the flange, and compress the return
spring with a press.
SST
09350-32013 (09351-32070, 09351-32130)
(b)
Install the snap ring.
NOTE:
Be sure the end gap of the snap ring is not
aligned with one of the cutouts.
Advertisement
Table of Contents
Troubleshooting
