Install Intake Manifold; Install Egr Valve With Pipe; Install Water Outlet With By-Pass Pipe; Clamp Wire Harness - Toyota MR2 1988 Repair Manual

EM-62 ENGINE MECHANICAL - Cylinder Head (4A-GZE)
EM4617
4. INSTALL ALTERNATOR
(See page CH-15)
5. INSTALL DISTRIBUTOR
(See page IG-10)
(w/ A/C)
6. INSTALL A/C COMPRESSOR AND BRACKET
7. INSTALL FRONT EXHAUST PIPE
(See page LU-12)
8. INSTALL INTAKE MANIFOLD
Install a new gasket, the intake manifold with the seven
bolts and two nuts.
Torque: 280 kg-em (20 ft-lb, 27 N·m)
9. INSTALL EGR VALVE WITH PIPE
Using new gaskets, install the EGR valve with pipe. Torque
the union bolt and two nuts.
Torque: Union bolt 700 kg-em (51 ft-lb, 69 N·ml
Nut 190 kg-em (14 ft-lb, 19 N·ml
10. INSTALL WATER OUTLET WITH BY-PASS PIPE
Using a new gasket, install the water outlet with by-pass
pipe to the cylinder head and intake manifold with the
three bolts.
11. CLAMP WIRE HARNESS
Clamp the wire harness with the five bolts.
12. INSTALL DELIVERY PIPE WITH INJECTORS
(See page Fl-90)