Install Low-Coast Modulator Valve; Assemble Lock-Up Relay Valve - Toyota MR2 1988 Repair Manual

AUTOMATIC TRANSAXLE - Component Groups (Valve Body)
AT-103
AT0664
AT0665
AT0666
8. INSTALL THROTTLE CAM ASSEMBLY TO UPPER
VALVE BODY
Check the position of the spring ends.
Tighten the bolt.
9. MAKE SURE THAT THROTTLE CAM MOVES ON
ROLLER OF KICK-DOWN VALVE
10. INSTALL LOW-COAST MODULATOR VALVE
(a) Install the modulator valve and spring.
(b) Install the plug and key.
11. ASSEMBLE LOCK-UP RELAY VALVE
(a) Install the release valve flat end first to the valve
sleeve, and install the spring.
(b) Install relay valve to the valve sleeve.
12. INSTALL LOCK-UP RELAY VALVE SLEEVE TO UPPER
VALVE BODY
(a) Install the valve sleeve to the upper valve body.
(b) Install the pin to hold the valve sleeve.