Table of Contents
Advertisement
/
BRAKE SYSTEM - Rear Brake
BR-35
C9980
C9969
4.
INSTALL PARKING BRAKE CRANK BOOT IN
CYLINDER
5.
INSTALL PARKING BRAKE CRANK IN CYLINDER
CAUTION:
Securely match the crank boot with the
groove of the crank seal.
6.
CHECK THAT THERE IS CLEARANCE AS SHOWN IN
FIGURE
7.
INSTALL TORSION SPRING
Install the torsion spring and check that the parking brake
crank subassembly is in touch with the stopper pin.
8.
INSTALL STRUT
Before installing the strut, adjust the rollers of the needle
Good
roller bearing so they do not catch on the cylinder hole.
0
No
Good
0
C9982
9.
INSTALL A NEW 0-RING TO ADJUSTING BOLT
C9983
Advertisement
Table of Contents
Troubleshooting
