Toyota MR2 1988 Repair Manual page 508

MANUAL TRANSAXLE - E51 Transaxle
MT-91
E8892
E8634
E8635
(b) Apply liquid sealant to the plug.
Sealant: Part No. 08833-00080, THREE BOND 1344,
LOCTITE 242 or equivalent
{c) Using SST, install and torque the plug.
SST 0931 3-30021
Torque: 250 kg-em (18 ft-lb, 25 N·m)
19. INSTALL SNAP RINGS
Using a plastic hammer, install the three snap rings.
20. INSTALL OUTPUT SHAFT REAR TAPER ROLLER
BEARING OUTER RACE
21. INSTALL SHIM
NOTE: Install the previously selected shim.
22. INSTALL SNAP RING
Using a snap ring pliers, install the snap ring to the input
shaft rear bearing.