Toyota MR2 1988 Repair Manual page 612

AT-94
AUTOMATIC TRANSAXLE - Component Groups (Counter Shaft)
AT05B2
AT0583
-
I
SST
AT0584
AT0565
AT0585
14. INSTALL NEW SPACER AND DRIVE PINION WITH
OUTPUT FLANGE
15. INSTALL ANOTHER BEARING TO COUNTER SHAFT
Using SST and a press, press in the other bearing.
SST 09350-32013 (09351-32180)
16.
17.
18.
19.
CAUTION: Be sure there is some clearance between
the output flange and bearing.
INSTALL BEARING INNER RACE
Using SST and a press, press in the inner race.
SST 09350-32013 (09351-32180)
CAUTION: Be sure there is some clearance.
INSTALL LOCK NUT
ADJUST PRELOAD OF COUNTER SHAFT
(See page AT -95)
INSTALL RACE AND BEARING
Coat the race and bearing with petroleum jelly and install
them.
20. INSTALL UNDERDRIVE PLANETARY GEAR
21. INSTALL SNAP RING