Toyota MR2 1988 Repair Manual page 433

MT-16 MANUAL TRANSAXLE - C52 Transaxle
MT0063
82675
82676
00188
34. REMOVE THIRD DRIVEN GEAR, SECOND GEAR,
NEEDLE ROLLER BEARING, SPACER AND
SYNCHRONIZER RING
(a) Shift No. 1 hub sleeve into the 1 st gear.
(b) Using SST and a press, remove the 3rd driven gear
and 2nd gear.
SST 09950-00020
(c) Remove the needle roller bearing, spacer and syn-
chronizer ring.
35. REMOVE SNAP RING
Using two screwdrivers and a hammer, tap out the snap
ring.
36. REMOVE NO.1 HUB SLEEVE ASSEMBLY, FIRST
GEAR, SYNCHRONIZER RING, NEEDLE ROLLER
BEARING, THRUST WASHER AND LOCKING BALL
(a) Using a press, remove No. 1 hub sleeve, 1st gear and
synchronizer ring.
(b) Remove the needle roller bearing, thrust washer and
locking ball.
37. DISASSEMBLE SHIFT AND SELECT LEVER SHAFT
ASSEMBLY
(a) Remove the E-ring and compression spring.